预移相型恒温热线(膜)流速计的动态响应方程

分析传统恒温热线热膜流速计(简称 HWFA)动态方程后,提出了一种新型HWFA 线路模型——主电桥预移相模型,推导出真实条件下小扰动动态响应方程,并按此原理设计制造了崭新的高性能 IFV—900型 HWFA 样机。该机全部革除了传统HWFA 的三个调节参量,大大地简化了调节步骤;不自激振荡的范围明显增宽,极大地减少了使用上的麻烦;频带宽度比当今世界流行的 HWFA 增宽了2～5倍;加上一系列智能化功能后使自动化程度达到了新的高度。这一新型 HWFA 的问世将可能导至 HWFA技术的重大改进和新的变革。首先阐明主电桥预移相模型的提出和真实条件下小扰动动态响应方程的推导。随后将用若干姐妹篇阐明动态方程频率响应调节元物理值的解析解,频率特性实验分析手段的电扰动试验响应情况的理论分析等内容。     

低温热水分户计量采暖系统共用立管水力平衡分析

本文分析了重力作用压头对低温热水计量采暖系统共用立管形式的影响,通过运用基尔霍夫定律分析了下分异程式双管系统和下分同程式双管系统的水力平衡状况,得出了下分异程式双管系统更适用于低温热水采暖系统的结论,并确定了立管经济比摩阻的范围和下分异程式双管可以负担的楼层数。     

燃气推力矢量控制发动机内流场数值模拟

采用基于Favre平均的三维N-S方程,对燃气推力矢量控制发动机全内流场进行了数值仿真,研究了燃气引流、燃气二次喷射及与发动机内主流相互作用等复杂流动。研究结果表明,流场内包含复杂的涡系结构和波系结构,还存在着边界层与激波的相互干扰、自由剪切层、激波、膨胀波和大尺寸分离。通过数值模拟,对试验中的异常现象进行了定性分析,得出了与试验一致的结论。     

固体火箭发动机排气羽流对红外制导信号衰减的计算方法

固体火箭发动机排气羽流对红外制导信号的衰减研究,对红外信号的探测与制导具有重要的理论和应用价值。文中主要介绍了红外制导信号的衰减机理,提出了计算排气羽流红外制导信号衰减的有效方法,编制了计算软件DROP,用该软件计算了水雾及颗粒群的光谱透射比,并与SIRRM软件的计算数据进行了对比。结果表明,两者数据基本一致,在工程应用中具有较大的参考价值。     

超音尾喷流红外抑制方案的研究

超音速发动机尾喷流的红外抑制是超音速飞行器隐身性能的重要组成部分。本文提出两种超音速尾喷流的红外抑制方案二次旋流方案与组合波瓣方案 ,并对两种方案共 7组试验件在不同的结构和二次流速度情况下进行了大量重复试验。在旋流方案试验中 ,对二次流加旋诱发大尺度流向涡进行了系统的研究 ,得到旋流角度、二次流速度等对掺混效果的影响规律 ,试验结果表明 :对于本结构方案 ,当二次流速度为 49m/s,旋流角在 3 0°左右 ,掺混效果最好 ,且随二次流流速的增加而加强。在组合波瓣方案的试验中 ,对组合波瓣用于超音尾喷流红外抑制进行了研究 ,试验结果表明可对超音尾喷流的红外起到有效的抑制作用。     

Magnetosphere Imaging Instrument (MIMI) on the Cassini Mission to Saturn/Titan

The magnetospheric imaging instrument (MIMI) is a neutral and charged particle detection system on the Cassini orbiter spacecraft designed to perform both global imaging and in-situ measurements to study the overall configuration and dynamics of Saturn’s magnetosphere and its interactions with the solar wind, Saturn’s atmosphere, Titan, and the icy satellites. The processes responsible for Saturn’s aurora will be investigated; a search will be performed for substorms at Saturn; and the origins of magnetospheric hot plasmas will be determined. Further, the Jovian magnetosphere and Io torus will be imaged during Jupiter flyby. The investigative approach is twofold. (1) Perform remote sensing of the magnetospheric energetic (E > 7 keV) ion plasmas by detecting and imaging charge-exchange neutrals, created when magnetospheric ions capture electrons from ambient neutral gas. Such escaping neutrals were detected by the Voyager l spacecraft outside Saturn’s magnetosphere and can be used like photons to form images of the emitting regions, as has been demonstrated at Earth. (2) Determine through in-situ measurements the 3-D particle distribution functions including ion composition and charge states (E > 3 keV/e). The combination of in-situ measurements with global images, together with analysis and interpretation techniques that include direct “forward modeling’’ and deconvolution by tomography, is expected to yield a global assessment of magnetospheric structure and dynamics, including (a) magnetospheric ring currents and hot plasma populations, (b) magnetic field distortions, (c) electric field configuration, (d) particle injection boundaries associated with magnetic storms and substorms, and (e) the connection of the magnetosphere to ionospheric altitudes. Titan and its torus will stand out in energetic neutral images throughout the Cassini orbit, and thus serve as a continuous remote probe of ion flux variations near 20R _S (e.g., magnetopause crossings and substorm plasma injections). The Titan exosphere and its cometary interaction with magnetospheric plasmas will be imaged in detail on each flyby. The three principal sensors of MIMI consists of an ion and neutral camera (INCA), a charge–energy–mass-spectrometer (CHEMS) essentially identical to our instrument flown on the ISTP/Geotail spacecraft, and the low energy magnetospheric measurements system (LEMMS), an advanced design of one of our sensors flown on the Galileo spacecraft. The INCA head is a large geometry factor (G ∼ 2.4 cm² sr) foil time-of-flight (TOF) camera that separately registers the incident direction of either energetic neutral atoms (ENA) or ion species (≥5^∘ full width half maximum) over the range 7 keV/nuc < E < 3 MeV/nuc. CHEMS uses electrostatic deflection, TOF, and energy measurement to determine ion energy, charge state, mass, and 3-D anisotropy in the range 3 ≤ E ≤ 220 keV/e with good (∼0.05 cm² sr) sensitivity. LEMMS is a two-ended telescope that measures ions in the range 0.03 ≤ E ≤ 18 MeV and electrons 0.015 ≤ E≤ 0.884 MeV in the forward direction (G ∼ 0.02 cm² sr), while high energy electrons (0.1–5 MeV) and ions (1.6–160 MeV) are measured from the back direction (G ∼ 0.4 cm² sr). The latter are relevant to inner magnetosphere studies of diffusion processes and satellite microsignatures as well as cosmic ray albedo neutron decay (CRAND). Our analyses of Voyager energetic neutral particle and Lyman-α measurements show that INCA will provide statistically significant global magnetospheric images from a distance of ∼60 R _S every 2–3 h (every ∼10 min from ∼20 R _S). Moreover, during Titan flybys, INCA will provide images of the interaction of the Titan exosphere with the Saturn magnetosphere every 1.5 min. Time resolution for charged particle measurements can be < 0.1 s, which is more than adequate for microsignature studies. Data obtained during Venus-2 flyby and Earth swingby in June and August 1999, respectively, and Jupiter flyby in December 2000 to January 2001 show that the instrument is performing well, has made important and heretofore unobtainable measurements in interplanetary space at Jupiter, and will likely obtain high-quality data throughout each orbit of the Cassini mission at Saturn. Sample data from each of the three sensors during the August 18 Earth swingby are shown, including the first ENA image of part of the ring current obtained by an instrument specifically designed for this purpose. Similarily, measurements in cis-Jovian space include the first detailed charge state determination of Iogenic ions and several ENA images of that planet’s magnetosphere.This revised version was published online in July 2005 with a corrected cover date.     

有无中心锥圆排波瓣喷管引射器内流场模拟与比较

用数值模拟手段研究了中心锥增进圆排波瓣喷管引射器内热混合流场的影响 ,推导了非正交曲线坐标系下有无中心锥圆排波瓣喷管引射器内流场的基本方程 ,采用 SIMPLEC算法和一种完全压力修正方法 ,以物理平面速度分量作为求解变量 ,以逆变速度作为界面流速 ,在同位网格上求解了有中心锥波瓣喷管引射器内的流场控制方程 ,并与实验测量结果和无中心锥的数值计算结果进行了比较。结果表明 ,计算结果与测量值符合较好。有中心锥的低温等值线可以延伸至中心轴线 ,与在没有中心锥的情况下 ,混合管中心轴线处的温度始终保持为高温状态有很大的不同。从而找到了有中心锥的圆柱混合管热混合效率大于没有中心锥的根本原因     

机械合金化＋热压制备Laves相NbCr2合金及其组织性能研究

采用机械合金化 热压工艺路线来制备化学配比成分的单相Laves相NbCr2合金.研究了Cr,Nb元素粉经20h球磨后在1200℃,1250℃和1300℃不同时间热压所获得的Laves相NbCr2合金的组织和性能.结果表明:1250℃×0.5h热压获得的Laves相NbCr2合金组织均匀,晶粒尺寸达到微/纳米级,致密度达到97.1%,室温断裂韧性高于5.07MPa·m1/2.与熔铸工艺制备的单相Laves相NbCr2合金的断裂韧性1.50MPa·m1/2相比,所制备的单相Laves相NbCr2合金的室温断裂韧性大大提高,充分实现了细晶韧化的效果.     

航空发动机排气系统数值模拟技术的初步研究

通过对我国航空发动机排气系统数值模拟技术研究的回顾与分析，以正在开发的排气系统气动热力分析软件包为基础，初步分析了航空发动机排气系统数值模拟技术研究的基本思路、主要模块和数据流程，并针对工程设计的实际需要，对航空发动机排气系统数值模拟技术的研究提出了建议。     

高温富油燃气作引导火焰的煤油超燃研究

对采用高温富油燃气作引导火焰的煤油超声速燃烧进行了研究。根据试验测得的壁面静压分布，采用一维简化模型处理与分析数据，得出了不同试验条件下的燃烧效率与总压恢复系数；对超声速燃烧室内的静压分布特点作出了分析；对超声速燃烧室人口处的气流总温，燃料喷射位置，以及燃烧总体当时比对燃烧室内静压分布、燃烧效率与总压恢复系数的影响进行了讨论。